Fixxr Mobile Mechanics | White
Search
Close this search box.

Clutch Cylinder Replacement (Master or Slave)

Clutch Master and Slave Cylinder Replacement

What is the Clutch Master Cylinder & Slave Cylinder all about?

A clutch master cylinder contains a reservoir that stores the brake fluid. It is connected to the clutch slave cylinder through hoses. When you push the clutch pedal, brake fluid flows from the clutch master cylinder to the slave cylinder, applying the pressure necessary to move (engage) the clutch.

It has internal and external seals that can fail. If the internal seals wear out, the clutch fluid will continue to circulate inside instead of being directed to the slave cylinder. If the external seals wear out, the clutch master cylinder will leak brake fluid, reducing the amount of fluid in the car and causing the clutch to malfunction. You may also find leaked brake fluid down by the clutch pedal (inside the car). In that case, the clutch pedal will go all the way to the floor when you apply the clutch.

Keep in mind:

  • Whenever the clutch master cylinder is replaced, it is recommended to replace the slave cylinder as well. When the master cylinder goes bad, it is widespread for the slave cylinder to follow suit.
  • Note that some clutch slave cylinders are installed inside the transmission. To replace this type of slave cylinder, the transmission has to be removed.

How it’s done:

  • Inspect clutch master cylinder and slave cylinder.
  • Check the condition of brake fluid.
  • Inspect the operation of the clutch pedal.
  • Remove and replace the clutch master cylinder and slave cylinder.
  • Bleed all air from the master cylinder.
  • Test drive the vehicle.

Our recommendation:

  • During an oil change, the mechanic should check the amount of brake fluid. If you feel a change in the clutch pedal feels (softer pedal) when stepping on it, you should have a mechanic inspect the clutch master cylinder and hose.
  • A professional mechanic should change the clutch fluid every 36,000 kilometers.

What common symptoms indicate you may need to replace the Clutch Master Cylinder & Slave Cylinder?

  • The clutch pedal goes all the way to the floor.
  • Brake fluid is leaking around the clutch pedal.
  • Not able to change gears.

How important is this service?

The clutch master cylinder stores brake fluid. When the clutch pedal is depressed, the fluid is transferred from the clutch master cylinder to the slave cylinder, which provides the pressure needed to engage the clutch. If the clutch master cylinder is leaking, it won’t hold the proper amount of brake fluid, and there won’t be enough pressure from the fluid to engage the clutch.

Description

Clutch Master and Slave Cylinder Replacement

What is the Clutch Master Cylinder & Slave Cylinder all about?

A clutch master cylinder contains a reservoir that stores the brake fluid. It is connected to the clutch slave cylinder through hoses. When you push the clutch pedal, brake fluid flows from the clutch master cylinder to the slave cylinder, applying the pressure necessary to move (engage) the clutch.

It has internal and external seals that can fail. If the internal seals wear out, the clutch fluid will continue to circulate inside instead of being directed to the slave cylinder. If the external seals wear out, the clutch master cylinder will leak brake fluid, reducing the amount of fluid in the car and causing the clutch to malfunction. You may also find leaked brake fluid down by the clutch pedal (inside the car). In that case, the clutch pedal will go all the way to the floor when you apply the clutch.

Keep in mind:

  • Whenever the clutch master cylinder is replaced, it is recommended to replace the slave cylinder as well. When the master cylinder goes bad, it is widespread for the slave cylinder to follow suit.
  • Note that some clutch slave cylinders are installed inside the transmission. To replace this type of slave cylinder, the transmission has to be removed.

How it’s done:

  • Inspect clutch master cylinder and slave cylinder.
  • Check the condition of brake fluid.
  • Inspect the operation of the clutch pedal.
  • Remove and replace the clutch master cylinder and slave cylinder.
  • Bleed all air from the master cylinder.
  • Test drive the vehicle.

Our recommendation:

  • During an oil change, the mechanic should check the amount of brake fluid. If you feel a change in the clutch pedal feels (softer pedal) when stepping on it, you should have a mechanic inspect the clutch master cylinder and hose.
  • A professional mechanic should change the clutch fluid every 36,000 kilometers.

What common symptoms indicate you may need to replace the Clutch Master Cylinder & Slave Cylinder?

  • The clutch pedal goes all the way to the floor.
  • Brake fluid is leaking around the clutch pedal.
  • Not able to change gears.

How important is this service?

The clutch master cylinder stores brake fluid. When the clutch pedal is depressed, the fluid is transferred from the clutch master cylinder to the slave cylinder, which provides the pressure needed to engage the clutch. If the clutch master cylinder is leaking, it won’t hold the proper amount of brake fluid, and there won’t be enough pressure from the fluid to engage the clutch.

Additional information

Variations

Master Cylinder, Slave Cylinder

Let our experienced consultants call you

Tell us about the service or issue you need help with